|
|
|
| The
TS 150 is a compact state-of-the-art dynamic vibration
isolation table. Which achieve better isolation performance than most
other damping systems. Ready to use on a plug and switch basis, the TS.150
now has been setting the standards for an excellent and easy to handle
vibration isolation solution. |
|
|
|
|
|
| Inertial
feedback is used via newly developed transducers to provide isolation from
building vibrations, but also from vibration sources, placed on the system
itself. No support media, like compressed air required. The new, precise
automatic height adjustment mechanism stabilizes the top plate at an
optimum working level even after major changes of load. Active isolation
mode can also be switched “ON” and “OFF” externally by a remote
control.
|
|
|
|
|
|
| The
isolation starts at 0,7 Hz and rapidly increase to 40 dB beyond 10 Hz. The
lack of any low resonance means much better performance than with common
passive damping. The inherent stiffness of the TS 150 imparts excellent
directional and positional stability. The outstanding isolation
performance of the TS 150 includes all six translational and rotational
vibration modes.
|
|
|
|
Technical
specification
|
|
Isolation
|
Dynamic
0,7 Hz to 1 kHz, purely passive beyond 1 kHz
|
|
Transmissibility
|
See
curve, above 10 Hz transmissibility <0,01 (-40dB)
|
|
Maximum
Load
|
150
kg
|
|
Size
|
400
x 450 x 75 mm (W x D x H)
|
|
Self-Weight
|
16
kg
|
|
Electrical
|
|
|
Safety
class
|
1
|
|
Power
Consumption
|
Typically
10 W, maximum 50 W (70VA)
|
|
Input
voltage
|
115-230
V AC ± 10%, 50-60 Hz
|
|
Environnemental
Conditions
|
|
|
Protection
Class
|
IP
20
|
|
Temperature
Range
|
5 ºC – 40 ºC
|
|
Relative
Humidity
|
10
– 90 % (5-30 ºC) / 10 – 60 % (30
- 40 ºC)
|
|
Application
|
Indoor
|
|
Altitude
|
Up
to 2000 m
|
|
Table
Top
|
|
|
Size
|
400
x 450 mm (W x D)
|
|
Material
|
Damped
aluminium sandwich construction 15 mm thick
|
|
Optional
|
Aluminium
top plate with tapped M6 on 25mm centres
|
|
|
