07 Oct Tribology Days 2019

Groot-Ammers  | Oktober 7, 2019

Visit us at Tribology Days 2019, a Swedish tribology conference organized by Luleå University of Technology. This two day conference is held in Kista (Stockholm) on Tuesday 12th – Wednesday 13th November, 2019.

Tribodays are held every autumn and is a meeting open for people from industry, institutes and academia and everybody who have interest in tribology.

ST Instruments will be present to discuss your tribology testing needs and the solutions we provide from Rtec Instruments.

The conference will be held in Kista at Swerim AB, Isafjordsgatan 28A, 164 40 Kista, Sweden.

New findings and new methodologies will be presented. It is a chance to gain new knowledge and to network. The meeting normally attracts 50-100 participants, mainly from Sweden but also from other parts of the world. All presentations are held in English.

The industry host, this year, is the research institute Swerim AB and there is an opportunity to learn more about their activities during the meeting.

Overview program

12 November

10.00  Registration and fika
11.00   Introduction
11.15    Fredrik Gustavsson, Swerim, “Tribology at Swerim”
12.00   Lunch
13.00   Bernie van Leeuwen, SKF, ”How a changing business requires tribology to become
             successful”
13.25   Jakob Lagercrantz, 2030-sekretariatet, ”From Arrhenius to IPCC – Climate crises; crises
            – or opportunity?”
13.50   Anna Hedlund Åström, KTH, “Sustainability in product development – the role of
             tribology”
14.15    Thomas Norrby, Nynas AB, ”Sustainability in the base oil industry: materials,
             processes, and product life cycles”
14.40   Tomas Östberg, SKF RecondOil, “How a circular mindset will change the industrial
             lubrication market”
15.15    Fika (coffee)
15.45    Panel discussion – tribology, sustainability,
16.30   Janet Lin, Luleå University of Technology, “Industrial AI in Maintenance: Issues,
            challenges and Trends”
16.50   Kalle Kalliorinne, Luleå University of Technology, “Topological Optimisation for
             Increased Bearing Performance?”
19.00   Dinner

 

13 November


8.30      Pouria Valizadeh Moghaddam, Luleå University of Technology, “Does an Advanced
              High-Strength Steel always give you a good wear resistance?”
8.50      Leonardo Pelcastre, Luleå University of Technology, “On the growth of material
              transfer at high temperature”
9.10      Justine Decrozant-Triquenaux, Luleå University of Technology, “High Temperature
              tribological behaviour of Aluminium –Application to hot forming”
9.30     Joel Olsson, Atlas Copco, “Greases & Gear Service Life”
10.00   Fika (coffee)
10.30   Jonny Hansen, Scania and Luleå University of Technology, “Small changes in surface
              roughness can make a dramatic difference!”
10.50   Tobias Hultqvist, Luleå University of Technology, “How hot and stressful are your
              asperities?”
11.10     Aleks Vrcek, Luleå University of Technology, “How to balance between mild wear and
              micro-pitting?”
11.30    Carl-Magnus Everitt, KTH, “The influence of gear surface roughness on rolling contact
              fatigue under TEHL conditions“
12.00    Lunch
13.00    Sajid Alvi, Luleå University of Technology, “Synthesis and mechanical characterization
              of CuMoTaWV high entropy film by magnetron sputtering”
13.20   Kaveh Torkashvand, University West, “Advanced wear resistant coatings by high
             velocity air-fuel (HVAF) and suspension spraying”
14.00   Fika (coffee)
14.30   Tour at Swerim
16.00   End of Tribodays

Some highlights from the program:

  • Bernie van Leeuwen, SKF, ”How a changing business requires tribology to become successful”
  • Jakob Lagercrantz, 2030-sekretariatet, ”From Arrhenius to IPCC – Climate crises; crises – or opportunity?”
  • Janet Lin, Luleå University of Technology, “Industrial AI in Maintenance: Issues,  challenges and Trends”
  • Thomas Norrby, Nynas AB, ”Sustainability in the base oil industry: materials, processes, and product life cycles”
  • Nazanin Emami, Luleå University of Technology, “PPS and PTFE composites for tribological applications”
  • Justine Decrozant-Triquenaux , Luleå University of Technology, “High Temperature tribological behaviour of Aluminium –Application to hot forming”
  • Jonny Hansen, Scania and Luleå University of Technology, “Small changes in surface roughness can make a dramatic difference!”
  • Aleks Vrcek, Luleå University of Technology, “How to balance between mild wear and micro-pitting?”
  • Tobias Hultqvist, Luleå University of Technology, “How hot and stressful are your asperities?”

The program will be continuously updated. If you want to give a talk or if you want to learn more about a specific area, then just contact us. There is also a possibility for exhibitions of equipment/software.

Tribodays are organized by Luleå University of Technology in association with the Swedish Tribology Association (Svenska Tribologigruppen).

https://www.ltu.se/research/subjects/Maskinelement/Konferenser/Tribology-Days-2019-1.188285?l=en

https://vimeo.com/352601130

 

Keep me updated!

Just enter your name and email and don't miss out on all innovative technologies in the world of surface analysis.